WINCRO METAL INDUSTRIES LTD
tel: 0114 242 2171
fax: 0114 243 4306
send email
WINCRO MASONRY SUPPORT SYSTEMS
|
CFA COLD FORMED ANGLE SYSTEM |
|||
| Description
The Wincro CFA Cold Formed Angle System comprises traditional support angle complete with either horizontally slotted or vertically slotted and serrated holes to enable location to the structure using a variety of fixing methods. CFA systems can be designed to incorporate all the fixing methods employed for the other Masonry Support Systems shown in this section. Examples showing CFA systems fixed to concrete structure are indicated below. CFA systems are available in various thicknesses and leg dimensions dependent upon the masonry height to be supported and the cavity width. Each system being designed to have sufficient adjustment in vertical, horizontal and lateral directions so as to accommodate all construction tolerances. Please consult our Technical Department for further information concerning load performance. Examples of standard CFA lengths: 3000mm for 8mm thick and over
|
CFA Typical Applications |
||
|
Concrete Structure
Toothed Cast-in Channel Fixing
|
|||
|
Concrete Structure - Light Angle Support
Continuous Cast-in Channel Fixing
|
|||
| Radiused
Angle
|
Expansion
Bolt Fixing
|
Concrete
Structure - Heavy Angle Support
Continuous Cast-in Channel Fixing
|
|
TIES & RESTRAINTS || MASONRY || LINTELS || CHANNELS & BOLTS
WINDPOSTS || REINFORCEMENT || FLOORING || CONTACTS
Copyright ©Wincro Metal Industries Ltd.