WINCRO TIES - General

WINCRO METAL INDUSTRIES LTD tel: 0114 242 2171 fax: 0114 243 4306 send email			WINCRO GENERAL WALL TIES
			1.0 WT1 Type 1 Tie The WT1 tie is manufactured from stainless steel grade 1.4301(304), conforming to DD140 part 2: as a type 1 tie. WT1 is suitable for cavities up to 150mm and is available in lengths from 200mm to 300mm. Suitable for buildings anywhere in the UK.
			2.0 WTS1S Type 1 Tie The WS1S tie is manufactured from stainless steel grade 1.4301(304), conforming to DD140 part 2: as a type 1 tie suitable for all building types within the UK. It is a heavy duty masonry tie for use in cavities from 50mm upwards and available in a variety of lengths and shanks to meet special applications.
			3.0 WT2 Type 2 Tie The WT2 tie is manufactured from stainless steel grade 1.4301(304) wire and conforms to DD140 part 2: as a type 2 tie. It has been assessed independently by the BRE and has NHBC approval for technical requirements. The Wincro WT2 tie is a general purpose tie suitable for cavities up to 100mm for domestic dwellings and small commercial buildings up to three storeys or not higher than 15m. It can, however, be used in areas where wind speeds are less than 56 m/s or where calculations prove it suitable. Please contact our Technical Design Team for further information.

			4.0 WT4 Type 4 Tie The WT4 tie is manufactured from stainless steel grade 1.4301(304) wire and conforms to DD140 part 2: as a type 4 tie. It has been assessed independently by the BRE, has NHBC approval for technical requirements and meets the new Part E requirements of the Building Regulations for the Resistance of the Passage of Sound in separating (party) or external walls as a Type A tie. WT4 is a housing tie suitable for masonry cavity walls of domestic housing up to two storeys, or not higher than 10m, with a density of not less than 2.5 ties per square metre.

			All the above Ties can be used in conjunction with the Wincro WIC Insulation Clip.
home contact			Visit our download page to refer to this section of the Products Manual for more details on the Classification of Ties, or for the Results of Mechanical Resistance tests. TIES & RESTRAINTS \|\| MASONRY \|\| LINTELS \|\| CHANNELS & BOLTS WINDPOSTS \|\| REINFORCEMENT \|\| FLOORING \|\| CONTACTS Copyright ŠWincro Metal Industries Ltd.