WINCRO METAL INDUSTRIES LTD
tel: 0114 242 2171
fax: 0114 243 4306
send email
WINCRO MOVEMENT TIES
At vertical movement joints the use of de-bonding sleeves on plain ended wall ties play a dual role: masonry is allowed to expand or contract while at the same time the tie restrains the masonry against lateral wind loads. Wincro WDS de-bonding sleeves are used at joints where there can be horizontal movement. Wincro recommends that de-bonding sleeves are installed with a 10mm gap at the end to allow for expansion.
All structures are subject to movement after construction because of
influences ranging from temperature to ground movement and
differential settlement. It is essential therefore, that provision
for movement is made at the design stage, and that it is made
bearing in mind the overall stability of the structure.
Specify:
2.0 WTS3P(incl WDS)
Lengths (mm): 150, 175, 200, 225, 250.
3.0 WTP3U (incl WDS)
Projections (mm): 100, 125, 150, 175, 200, 225, 250, 275, 300.
4.0 WTP3P (incl 2 No.WDS)
Projections (mm): 100, 125, 150, 175, 200, 225, 250, 275, 300.
5.0 WTP3C28 (incl WDS)
Projections (mm): 100, 125, 150, 175, 200, 225.
2.0
3.0
4.0
5.0
TIES & RESTRAINTS || MASONRY || LINTELS || CHANNELS & BOLTS
WINDPOSTS || REINFORCEMENT || FLOORING || CONTACTS
Copyright ©Wincro Metal Industries Ltd.