WINCRO METAL INDUSTRIES LTD

tel: 0114 242 2171
fax: 0114 243 4306
send email

TIES & RESTRAINTS PRODUCT RANGE

Wincro's range of standard and special ties can be used in many applications such as masonry-to-masonry, masonry-to-concrete and masonry-to-steelwork.

The range of cavity wall ties are suitable for dwellings up to 3 storeys.

This tie restrains masonry against lateral wind loads while at the same time allowing for expansion and contraction.

A full range of standard and bespoke cramps to suit cavities from 10mm upwards.

The UC tie is a time-saving solution for tying masonry to steelwork and eliminates the need for on-site drilling or shot-firing.

Typically used where the inner leaf is built before the outer leaf and particularly useful with irregular coursing between inner and outer leaves.

The innovative answer to larger cavity situations.

Construction time is reduced and on-site drilling rendered unnecessary by the range of ties for use with cast-in channels.

These are especially useful below horizontal movement joints providing support while allowing vertical movement.

These restraint fixings provide a mechanical tie between masonry cladding panels and the building frame where a movement joint is used.

Available with a variety of head and stem configurations to accommodate fixing to the soffit or face of steelwork or concrete structures.

When selecting ties for restraining stone cladding, reference should be made to the appropriate British Standard - and, of course, to the help available from Wincro's Technical Design Team.

Provides extra strength to masonry cladding panels and can also be used to strengthen both inner and outer leaves and provide an alternative cavity restraint fixing.

Providing an economic repair solution where traditional cavity wall ties have failed. Wincro provides a complete range of expanding mechanical and resin-fixed wall ties.

Copyright ©Wincro Metal Industries Ltd.